DIY CNC Controller
From CNC.xyz Wiki
 3 Axis Controller | |
| Status | In Production |
|---|---|
| Manufacterer | A Quick CNC |
| Version | 1.0.3 |
More here.
Assembly Instructions
Schematic
Bill of Materials (BOM)
| Line # | Quantity | Part Code | Digikey | Description |
|---|---|---|---|---|
| 1 | 3 | IC1, IC2, IC3 | SLA7078MPR-ND | SLA7078MPR Driver chip from Sanken |
| 2 | 2 | IC4, IC5 | LM317HVT | High Voltage Adjustable Regulator |
| 3 | 1 | X1 | HRP26H-ND | 26 Pin Male IDC Connector |
| 4 | 4 | TB1, TB2, TB3, TB4 | ED2613-ND | 6 Position Terminal Block |
| 5 | 2 | TB5, TB6 | ED2609-ND | 2 Position Terminal Block |
| 6 | 8 | C1, C2, C3, C4, C5, C6, C7, C11 | ||
| 7 | 3 | C8, C9, C10 | 565-1613-ND | Capacitor Aluminum 680uF 50V 20% |
| 8 | 3 | R1, R2, R3 | ||
| 9 | 2 | R5, R7 | ||
| 10 | 1 | R4 | ||
| 11 | 1 | R6 | ||
| 12 | 3 | VR1, VR2, VR3 | ||
| 13 | 3 | SW1,SW2, SW3 | ||
| 14 | 4 | RN1, RN2, RN3, RN4 |