Difference between revisions of "SLA7078MPR"
From CNC.xyz Wiki
(→Technical Documents) |
|||
| (One intermediate revision by the same user not shown) | |||
| Line 2: | Line 2: | ||
The built-in excitation distribution circuit (sequencer) allows motor control using only the CLOCK signal for simple operations (rotate/stop), with motor speed control by frequency input into CLOCK pin. This eliminates logic signal lines required for conventional phase-input methods, and reduces demand on heavily-used CPUs.<ref>http://www.allegromicro.com/en/Products/Sanken-Products/Sanken-ICs/Sanken-Motor-Driver-ICs/Sanken-Stepper-Motor-Unipolar-Driver-ICs/SLA7070M-Series.aspx</ref></blockquote> | The built-in excitation distribution circuit (sequencer) allows motor control using only the CLOCK signal for simple operations (rotate/stop), with motor speed control by frequency input into CLOCK pin. This eliminates logic signal lines required for conventional phase-input methods, and reduces demand on heavily-used CPUs.<ref>http://www.allegromicro.com/en/Products/Sanken-Products/Sanken-ICs/Sanken-Motor-Driver-ICs/Sanken-Stepper-Motor-Unipolar-Driver-ICs/SLA7070M-Series.aspx</ref></blockquote> | ||
| + | |||
| + | ==Features & Benefits== | ||
| + | |||
| + | *Power supply voltages, VBB: 46 V(max.), 10 to 44 V normal operating range | ||
| + | *Logic supply voltages, VDD: 3.0 to 5.5 V | ||
| + | *Maximum output currents: 1 A, 1.5 A, 2 A, 3 A | ||
| + | *Built-in sequencer | ||
| + | *Simplified clock-in stepping control | ||
| + | *Both full/half-stepping (SLA7070M to SLA7073M) and microstepping (SLA7075M to SLA7078M) | ||
| + | *Built-in sense resistor, RSInt | ||
| + | *All variants are pin-compatible for enhanced design flexibility | ||
| + | *ZIP type 23-pin molded package (SLA package) | ||
| + | *Self-excitation PWM current control with fixed off-time | ||
| + | *Built-in synchronous rectifying circuit reduces losses at PWM off | ||
| + | *Synchronous PWM chopping function prevents motor noise in Hold mode | ||
| + | *Sleep mode for reducing the IC input current in stand-by state | ||
| + | *Built-in protection circuitry against motor coil opens/shorts option available | ||
| + | |||
| + | ==Technical Documents== | ||
| + | *[http://www.allegromicro.com/~/media/Files/Sanken/Datasheets/SLA7070M-SLA7071M-SLA7072M-SLA7073M-Datasheet.ashx SLA7070-1-2-3M Datasheet] | ||
| + | *[http://www.allegromicro.com/~/media/Files/Sanken/Datasheets/SLA7075M-SLA7076M-SLA7077M-SLA7078M-Datasheet.ashx SLA7075-6-7-8M Datasheet] | ||
| + | *[http://www.allegromicro.com/~/media/Files/Sanken/Datasheets/SLA7070M-SLA7071M-SLA7072M-SLA7073M-SLA7075M-SLA7076M-SLA7077M-SLA7078M-Application-Note.ashx Application Note: SLA7070M Series Motor Driver ICs] | ||
==References== | ==References== | ||
<references /> | <references /> | ||
Latest revision as of 06:21, January 29, 2014
The SLA7070M series motor driver ICs feature unipolar drivers. The clock-in type input interface allows simplified control logic, and options for built-in sense current detection and load circuit short or open protection (patent pending) provide lower loss, and lower thermal resistance. All products in the SLA7070M series are pin-compatible, supporting rapid design of application variants. The built-in excitation distribution circuit (sequencer) allows motor control using only the CLOCK signal for simple operations (rotate/stop), with motor speed control by frequency input into CLOCK pin. This eliminates logic signal lines required for conventional phase-input methods, and reduces demand on heavily-used CPUs.[1]
Features & Benefits
- Power supply voltages, VBB: 46 V(max.), 10 to 44 V normal operating range
- Logic supply voltages, VDD: 3.0 to 5.5 V
- Maximum output currents: 1 A, 1.5 A, 2 A, 3 A
- Built-in sequencer
- Simplified clock-in stepping control
- Both full/half-stepping (SLA7070M to SLA7073M) and microstepping (SLA7075M to SLA7078M)
- Built-in sense resistor, RSInt
- All variants are pin-compatible for enhanced design flexibility
- ZIP type 23-pin molded package (SLA package)
- Self-excitation PWM current control with fixed off-time
- Built-in synchronous rectifying circuit reduces losses at PWM off
- Synchronous PWM chopping function prevents motor noise in Hold mode
- Sleep mode for reducing the IC input current in stand-by state
- Built-in protection circuitry against motor coil opens/shorts option available
Technical Documents
- SLA7070-1-2-3M Datasheet
- SLA7075-6-7-8M Datasheet
- Application Note: SLA7070M Series Motor Driver ICs