Parallel Breakout Board
From CNC.xyz Wiki
 Parallel Breakout Board | |
| Status | In Development |
|---|---|
| Manufacterer | A Quick CNC |
| Version | 1.0.0 |
| Designer | AJ Quick |
| License | CC BY-SA 3.0 |
The Parallel Breakout Board is one of the simplest and yet one of the most important parts for a traditional CNC machine. This parallel breakout board will take a signal from a male DB-25 connector and will convert the signal to an easy to access terminal block for direct wiring. Pins 1-17 are broken out according to a standard Parallel Port specification. Pins 18-25 are connected to ground.
Contents
Features
- Easy adapter that breaks out the parallel port and converts to board to wire connectors.
- Access to pins 1-17 of the parallel port. Pins 18-25 are grounded.
Board Layout
The board is 2.80" x 1.80" with mounting holes at 2.50" x 1.50" with 4mm holes (#6 screws can be used if 4mm screws are not available).
Schematic
Bill of Materials (BOM)
| Line # | Quantity | Part Code | Digikey | Description |
|---|---|---|---|---|
| 1 | 1 | X1 | AE10982-ND | DB-25 Male Right Angle Connector |
| 2 | 2 | X2, X5 | ED2610-ND | 3 Position Terminal Block |
| 6 | 2 | X3, X4 | ED2613-ND | 6 Position Terminal Block |
Gerber Files
Eagle Files
License
This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported License.