Difference between revisions of "Parallel Breakout Board"
From CNC.xyz Wiki
(→Features) |
|||
Line 40: | Line 40: | ||
| 1 || 1 || X1 || [http://www.digikey.com/short/jdm7c AE10982-ND] || DB-25 Male Right Angle Connector | | 1 || 1 || X1 || [http://www.digikey.com/short/jdm7c AE10982-ND] || DB-25 Male Right Angle Connector | ||
|- | |- | ||
− | | 2 || | + | | 2 || 2 || X2, X5 || [http://www.digikey.com/short/jdmc7 ED2610-ND] || 3 Position Terminal Block |
|- | |- | ||
| 6 || 2 || X3, X4 || [http://www.digikey.com/short/j2vhn ED2613-ND] || 6 Position Terminal Block | | 6 || 2 || X3, X4 || [http://www.digikey.com/short/j2vhn ED2613-ND] || 6 Position Terminal Block |
Revision as of 04:22, January 30, 2014
Status | In Development |
---|---|
Manufacterer | A Quick CNC |
Version | 1.0.0 |
Designer | AJ Quick |
License | CC BY-SA 3.0 |
Contents
Features
- Easy adapter that breaks out the parallel port and converts to board to wire connectors.
- Access to pins 1-17 of the parallel port. Pins 18-25 are grounded.
Board Layout
The board is 2.80" x 1.80" with mounting holes at 2.50" x 1.50" with 4mm holes (#6 screws can be used if 4mm screws are not available).
Schematic
Bill of Materials (BOM)
Line # | Quantity | Part Code | Digikey | Description |
---|---|---|---|---|
1 | 1 | X1 | AE10982-ND | DB-25 Male Right Angle Connector |
2 | 2 | X2, X5 | ED2610-ND | 3 Position Terminal Block |
6 | 2 | X3, X4 | ED2613-ND | 6 Position Terminal Block |
Gerber Files
Eagle Files
License
This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported License.