Grbl Screw Shield

From CNC.xyz Wiki
Jump to: navigation, search
Grbl Screw Shield
Grbl Screw Shield.jpg
Grbl Screw Shield
Status In Development
Manufacterer A Quick CNC
Version 1.0.0
Designer AJ Quick
License CC BY-SA 3.0

The Grbl Screw Shield is an easy to use Arduino Shield that plugs into an Arduino UNO or similar device. Once plugged in, screw terminals are accessible on the top of the board, and clearly labeled for the default configuration of Grbl.

Features

  • Easy adapter that breaks out the Arduino pins and converts to board to wire connectors for Grbl.
  • Default Grbl configuration for Arduino UNO.

Board Layout

The board is the same size as an Arduino UNO (or similar board).

Grbl Screw Shield Board Layout.png

Schematic

Gbrl Screw Shield Schematic.png

Bill of Materials (BOM)

Line # Quantity Part Code Digikey Description
1 3 X1, X2, X3 ED2613-ND 6 Position Terminal Block

Gerber Files

Gerber File Download

Eagle Files

Eagle File Download

License

This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported License.