Grbl Screw Shield
From CNC.xyz Wiki
![]() Grbl Screw Shield | |
Status | In Development |
---|---|
Manufacterer | A Quick CNC |
Version | 1.0.0 |
Designer | AJ Quick |
License | CC BY-SA 3.0 |
The Grbl Screw Shield is an easy to use Arduino Shield that plugs into an Arduino UNO or similar device. Once plugged in, screw terminals are accessible on the top of the board, and clearly labeled for the default configuration of Grbl.
Contents
Features
- Easy adapter that breaks out the Arduino pins and converts to board to wire connectors for Grbl.
- Default Grbl configuration for Arduino UNO.
Board Layout
The board is the same size as an Arduino UNO (or similar board).
Schematic
Bill of Materials (BOM)
Line # | Quantity | Part Code | Digikey | Description |
---|---|---|---|---|
1 | 3 | X1, X2, X3 | ED2613-ND | 6 Position Terminal Block |
Gerber Files
Eagle Files
License
This work is licensed under a Creative Commons Attribution-ShareAlike 3.0 Unported License.