G-Code

From CNC.xyz Wiki
Revision as of 07:38, January 30, 2014 by AJ Quick (talk | contribs)
Jump to: navigation, search
Header text Header text
G0 Coordinated Straight Motion Rapid Rate
G1 Coordinated Straight Motion Feed Rate
G2 G3 Coordinated Helical Motion Feed Rate
G4 Dwell
G5.1 Quadratic B-Spline
G5.2 G5.3 NURBs Block
G7 Diameter Mode (lathe)
G8 Radius Mode (lathe)
G10 L1 Set Tool Table Entry
G10 L10 Set Tool Table, Calculated, Workpiece
G10 L11 Set Tool Table, Calculated, Fixture
G10 L2 Coordinate System Origin Setting
G10 L20 Coordinate System Origin Setting Calculated
G17 - G19.1 Plane Select
G20 G21 Units of Measure
G28 - G28.1 Go to Predefined Position
G30 - G30.1 Go to Predefined Position
G33 Spindle Synchronized Motion
G33.1 Rigid Tapping
G38.2 - G38.5 Probing
G40 Cancel Cutter Compensation
G41 G42 Cutter Compensation
G41.1 G42.1 Dynamic Cutter Compensation
G43 Use Tool Length Offset from Tool Table
G43.1 Dynamic Tool Length Offset
G49 Cancel Tool Length Offset
G53 Motion in Machine Coordinate System
G54 - G59 Select Coordinate System (1 - 6)
G59.1 - G59.3 Select Coordinate System (7 - 9)
G61 G61.1 Path Control Mode
G64 Path Control Mode with Optional Tolerance
G73 Drilling Cycle with Chip Breaking
G76 Multi-pass Threading Cycle (Lathe)
G80 Cancel Motion Modes
G81 Drilling Cycle
G82 Drilling Cycle with Dwell
G83 Drilling Cycle with Peck
G85 Boring Cycle, No Dwell, Feed Out
G86 Boring Cycle, Stop, Rapid Out
G89 Boring Cycle, Dwell, Feed Out
G90 G91 Distance Mode
G90.1 G91.1 Arc Distance Mode
G92 Coordinate System Offset
G92.1 G92.2 Cancel Coordinate System Offsets
G92.3 Restore Axis Offsets
G93 G94 G95 Feed Modes
G96 Constant Surface Speed
G97 RPM Mode
G98 G99 Canned Cycle Z Retract Mode